+86 189 5893 6288
Home  /  Industry Knowledge

Industry Knowledge

INDUSTRY KNOWLEDGE

Micro Spray Tape or Drip Tape? How to Choose

2026-08-15  ·  Selection Guide

Micro Spray Tape or Drip Tape? How to Choose

Drip is localized irrigation that delivers water drop by drop to the root zone — low evaporation loss, up to 95% water use efficiency. Micro spray tape sprays through orifices to wet the surface, suiting leafy greens and nursery scenarios that need whole-area wetting. Judge from four points: crop type, row spacing, wa…

Read More →
How to Choose Drip Tape Wall Thickness? 0.2 or 0.4

2026-08-05  ·  Selection Guide

How to Choose Drip Tape Wall Thickness? 0.2 or 0.4

Wall thickness determines tear resistance, aging resistance and unit price: 0.15-0.2mm for single-season short-cycle crops; 0.3-0.4mm for multi-season reuse under foot and machine traffic; cylindrical drip line of 0.6mm or more for long-term orchard installation. Wall thickness does not change discharge distance.

Read More →
Micro Spray, Drip or Sprinkler? Comparing Three Water-Saving Methods

2026-07-25  ·  Industry Knowledge

Micro Spray, Drip or Sprinkler? Comparing Three Water-Saving Methods

Sprinkler irrigates large areas; micro spray provides low-flow surface irrigation; drip delivers precise root-zone irrigation. Compare on water saving, wetting pattern, humidity effect and system cost, then follow a four-step selection: look at the scenario, the crop, the water source and the budget.

Read More →
Pressure and Flow: Two Basic Parameters of Irrigation System Design

2026-07-10  ·  Technical Guide

Pressure and Flow: Two Basic Parameters of Irrigation System Design

1 MPa ≈ 10 kg/cm² ≈ 100 m head. Recommended working pressure for micro spray tape is 1-1.5 kg/cm². Pump head must be ≥ elevation difference + line losses + working pressure, and flow is calculated by the area irrigated at one time — this is the key to judging whether your pump can handle the system.

Read More →
How Much Water Does Drip Irrigation Really Save?

2026-06-10  ·  Industry Knowledge

How Much Water Does Drip Irrigation Really Save?

Water use efficiency can reach 95%, saving 35%-75% of water compared with sprinkler irrigation; irrigation uniformity above 90%; emitter discharge only 2-12 L/h. Combined with fertigation, fertilizer efficiency can more than double — clear savings in water, fertilizer and yield gains.

Read More →
How to Choose Filters for Micro-Irrigation

2026-05-22  ·  Technical Guide

How to Choose Filters for Micro-Irrigation

Drip irrigation demands clean water — filtration is a must. Sand filters remove sediment and organic impurities; disc filters (120 mesh) remove particulate impurities; screen filters (100 mesh) suit secondary fine filtration. A combined filter head with regular backwashing is the most reliable setup.

Read More →

Need Selection Advice or a Factory Quote?

Tell us your crops, area and water source — we will send a configuration plan and quotation promptly.

Call Now Contact Us Chat on WhatsApp
Call Now WhatsApp